Points of Inspection

A Hotskin test for RVs is a critical electrical examination designed to detect potentially dangerous electrical charges flowing through the RV's frame, body, or other metal components. This safety procedure helps pinpoint any electrical issues that may pose risks to both the RV and its occupants. By identifying these concerns, the Hotskin test plays a pivotal role in inspecting the safety of your RV, ensuring that you can embark on your adventures with peace of mind.

A propane timed leak test is a safety procedure for RVs that involves checking the propane system for potential leaks by pressurizing the system and monitoring it for a specific duration to ensure there are no gas leaks. This essential test helps identify and mitigate any propane-related safety hazards, ensuring a secure and worry-free RV experience.

A GFCI (Ground Fault Circuit Interrupter) outlet test is a safety procedure to verify the functionality of these specialized electrical outlets. The main purpose of a GFCI outlet is to prevent electrical shocks and protect individuals from the dangers of faulty appliances or wiring.  

Verifying the functionality of all emergency exit windows in an RV to ensure they open easily and provide a safe means of egress in case of an emergency. This procedure is crucial for RV safety and ensures that all occupants can swiftly exit the vehicle if the need arises. 

This assessment involves ensuring that the RV's fire extinguisher is an acceptable type and is securely mounted and fully charged, ready for immediate use in case of a fire emergency. It's a critical safety measure that guarantees the extinguisher's readiness to help protect occupants and the RV from potential fire hazards. 

We test and verify operation and expiration date of Smoke/Fire Detectors and Carbon Monoxide Detectors. We also verify that the detectors are RV rated.

This test involves verifying the functionality of the LP gas detector, ensuring it can detect gas leaks and trigger audio alarms effectively. It also includes documenting the expiration date of the detector to maintain a safe RV environment, preventing potential gas-related hazards.

Ensuring the RV water heater is properly sealed is vital for safety, efficiency, and protection against potential water damage. A secure seal prevents the escape of harmful gases, maintains the heater's efficiency, and safeguards against water intrusion, all contributing to peace of mind and adherence to safety standards. 

Inspecting the operation of chassis signal and running lights is a safety check to ensure that all exterior lights on the RV's chassis are functioning correctly. This inspection is essential for maintaining visibility and compliance with traffic regulations. The Brake-a-Way system is also tested to ensure the brake activate when necessary.

A comprehensive evaluation of the entire RV roof, focusing on the state of sealants, joints, and various components like roof vents, air conditioners, antennas, and more. The objective is to detect any indications of wear, damage, or potential leaks that might jeopardize the structural integrity and weather resistance of the RV. Consistent inspections of these crucial elements are imperative for preserving the RV's durability and guaranteeing its protection against potential water damage. 

This inspection focuses on evaluating the condition of the exterior sidewalls and endcaps of the RV. It involves a thorough examination of these surfaces to identify any signs of damage, wear, or structural issues. Additionally, the inspection includes checking for proper seals, ensuring that all components are securely attached, and addressing any concerns that may impact the RV's aesthetic appearance, structural integrity, or weather resistance.

This inspection is specifically dedicated to evaluating the condition and functionality of the RV's exterior slideout mechanisms. It encompasses a comprehensive examination of the slideout's exterior components, including seals, mechanical systems, and structural integrity. The primary goal is to identify any signs of wear, damage, or operational issues that could affect the slideout's smooth operation, structural stability, or weather resistance. 

This inspection is designed to assess the condition of the RV's awning and slide topper. It encompasses a thorough examination of these exterior components, focusing on their functionality, integrity, and overall condition. The inspection checks for wear, damage, and proper operation of the awning and slide topper systems, ensuring they provide reliable shelter and protection against the elements.

An RV leveling system is an integral component designed to stabilize and level the vehicle when parked. It involves the use of hydraulic or electric jacks that extend and retract to ensure the RV is positioned evenly on various terrains. This system plays a pivotal role in enhancing comfort, preventing discomfort from uneven surfaces, and safeguarding appliances and systems that rely on level positioning. 

An RV hitch system inspection evaluates the hitch and associated towing elements, including the coupler, safety chains, and weight distribution system. Its primary goal is to ensure the secure attachment and proper functionality of these components, enhancing safety and roadworthiness during RV towing. Detecting and addressing potential issues ensures a trouble-free connection between the RV and towing vehicle, contributing to safe and efficient travel.

This inspection is dedicated to evaluating the condition and functionality of the ceiling vent fan and covers in an RV. It involves a examination of the fan's components, including the motor, blades, and ventilation system, to ensure proper operation. The primary goal is to identify any signs of wear, damage, or mechanical issues that might impact the fan's ability to ventilate the RV effectively.

A detailed examination of windows and doors, ensuring their functionality, security, and weather resistance. This involves checking for proper sealing, inspecting frames and hinges, and testing mechanisms such as locks and latches. 

An evaluation of all interior and exterior lighting systems. It aims to confirm that all lights are operational, securely connected, and free from damage or wear. This inspection covers a wide range of lighting fixtures, including ceiling lights, wall sconces, awning lights, and more. The ultimate objective is to ensure safe and effective illumination, contributing to the convenience and comfort of RV living.

A detailed assessment of audio and visual components like TVs, stereo systems, DVD players, and speakers. Our goal is to ensure optimal functionality, identifying and addressing any issues such as malfunctions or connectivity problems. With expertise gained from our previous home with a dedicated theater room, we bring enhanced knowledge to thoroughly evaluate and optimize your RV's entertainment system. 

A shower/tub inspection in an RV involves an evaluation of the bathroom fixtures to identify any obvious signs of problems or damage. This assessment focuses on checking for visible issues, such as water leaks, that may indicate potential concerns. Additionally, it includes an examination of plumbing components, like the showerhead, faucet, and drainage system, to spot any visible issues or irregularities.

Polarity testing is a crucial electrical assessment that confirms the correctness of electrical connections within a circuit or outlet, ensuring the proper alignment of hot, neutral, and ground wires. This test also identifies ground faults or interruptions in the electrical flow that could pose safety risks, making it an essential procedure for maintaining electrical safety, reliability, and shock prevention. 

A 120V electrical inspection in an RV involves an evaluation of the electrical systems and components that operate on 120 volts of alternating current (AC). The primary objective is to confirm the safe and correct functioning of these electrical systems.This inspection entails checking for any noticeable indications of wear, damage, or loose connections, while also ensuring that, when applicable, all 120V electrical components are securely grounded and adhere to safety standards.

An inverter inspection in an RV is an assessment of the inverter unit, which is responsible for converting DC (direct current) power from the RV's batteries into AC (alternating current) power for operating household appliances and devices. This inspection aims to ensure the inverter's proper operation, including checking for signs of wear, damage, or malfunction. It also involves verifying the inverter's connections and its compatibility with the RV's electrical system.

A breaker panel inspection in an RV involves a thorough evaluation of the electrical distribution panel, which contains circuit breakers or fuses that safeguard the RV's electrical system. This inspection aims to ensure the proper operation of the breakers, as well as checking for signs of wear, damage, or malfunctions. It also involves confirming that the breaker panel is securely mounted and all wiring connections are in good condition.

A 12V system inspection in an RV is a comprehensive assessment of the electrical systems and components that run on 12 volts of direct current (DC). This inspection aims to ensure the proper operation of these systems, including lighting, fans, water pumps, and various other 12V devices. It includes checking for visible signs of wear, damage, or loose connections, as well as verifying the condition of the RV's batteries and charging system. 

A coach battery system inspection in an RV is a detailed evaluation of the batteries that power the RV's vehicle components. This inspection aims to ensure the proper operation and condition of the coach batteries. It includes checking for signs of wear, damage, and corrosion on battery terminals and cables, as well as assessing the overall health and charge levels of the batteries.

An assessment of the fuse box that controls and safeguards the 12-volt electrical circuits within the RV. This inspection aims to ensure the proper operation of fuses, which protect the 12V systems from overloads and short circuits. It includes checking for signs of wear, damage, or blown fuses, as well as verifying the condition of fuse connections and terminals. The inspection may also involve confirming that the 12V electrical circuits are appropriately labeled for easy identification. 

An RV refrigerator inspection is anassessment of the RV's refrigeration unit to ensure it's operating correctly and efficiently. This inspection includes checking for signs of wear, damage, or malfunction in the refrigerator's components, such as the cooling unit, thermostat, and seals. It also involves verifying that the refrigerator can operate on various power sources, including 12V DC, 120V AC, and propane gas if applicable.

An evaluation of the water heating system in the RV. This inspection aims to ensure the safe and efficient operation of the water heater, which provides hot water for various onboard amenities such as showers and sinks. It includes checking for signs of wear, damage, or leaks in components like the heating element, thermostat, pressure relief valve, and the water tank itself.

Inspecting the RV furnace operation involves an evaluation of the heating system in the recreational vehicle. This inspection aims to ensure the safe and effective functioning of the furnace, which provides warmth and comfort during colder seasons or chilly nights. It includes checking for signs of wear, damage, or malfunctions in furnace components like the burner, blower, thermostat, and ductwork.

Checking for RV cooktop/stove operation involves assessing the functionality of the cooking appliances in the recreational vehicle. It includes checking for signs of wear, damage, or malfunction in components like burners, igniters, and knobs. Additionally, the inspection involves confirming that the appliances are properly connected to the RV's propane system and that they can ignite, control the flame, and provide a consistent heat source for cooking.

Inspecting the RV air conditioner operation involves a detailed evaluation of the cooling system in the recreational vehicle. This inspection aims to ensure the effective and efficient functioning of the air conditioner. It includes checking for signs of wear, damage, or malfunctions in the air conditioner's components such as the compressor, condenser, thermostat, and filters.

Inspecting the operation of an RV washer and dryer involves an evaluation of these appliances within the recreational vehicle. This inspection aims to ensure that the washer and dryer are functioning correctly and effectively. It includes checking for signs of wear, damage, or malfunction in the components of these appliances, such as the washing and drying mechanisms, controls, and connections.

This inspection aims to ensure that the electric fireplace is operating correctly and efficiently. It includes checking for signs of wear, damage, or malfunction in components such as the heating element, flame effects, controls, and safety features. The inspection also involves verifying that the electric fireplace is properly connected to the RV's electrical system and that it can generate heat, display flames, and provide a cozy ambiance when needed.

This inspection aims to ensure that the solar system is generating and managing power correctly. It includes checking for signs of wear, damage, or malfunction in components such as solar panels, charge controllers, batteries, and electrical connections. The inspection also involves verifying that the solar system is properly integrated with the RV's electrical system and that it can effectively harness and store solar energy for powering various devices and appliances.

This inspection aims to ensure that the black tank and associated components are operating correctly. It includes checking for signs of wear, damage, or malfunctions in components such as the tank itself, the sewer hose, valve, sensors, and venting system. The inspection also involves verifying that the black tank system is properly connected and that it can effectively collect and store wastewater while preventing odors and leaks.

The gray water system in an RV refers to the wastewater collection and disposal system for non-toilet water sources, such as sinks and showers. Gray water systems are designed to gather and store this relatively clean wastewater, which does not contain human waste, and safely dispose of it when the RV is not connected to a sewer hookup. Gray water systems help maintain a clean and sanitary living environment in the RV by separating relatively clean water from black water (sewage).

This inspection aims to ensure the safe and efficient operation of the freshwater system, which provides potable water for drinking, cooking, and other domestic uses. It includes checking for signs of wear, damage, or leaks in components such as the water tank, pump, hoses, filters, and connections. Additionally, the inspection involves confirming that the freshwater system is properly connected to the RV's plumbing and that it can deliver clean and safe water to various fixtures and appliances.

This inspection aims to ensure that the propane system is operating correctly and safely. It includes checking for signs of wear, damage, or malfunctions in components such as the propane tanks, regulators, hoses, valves, and appliances that run on propane. The inspection also involves verifying that the propane system is properly connected to the RV's gas lines and that it can efficiently fuel appliances like stoves, ovens, water heaters, and refrigerators. 

This inspection aims to identify any visible signs of wear, damage, or potential issues in the engine and its surrounding components. It includes checking for oil or fluid leaks, loose or damaged belts and hoses, corrosion, and any visible issues with electrical connections. While a visual inspection can reveal some potential problems, it may not uncover all engine issues. We also offer a fluid analysis, to gain a better understanding of the engine's condition.

This inspection aims to identify any visible signs of wear, damage, or potential issues in the transmission and its associated components. It includes checking for leaks, loose or damaged transmission lines, and examining the transmission pan for signs of wear and damage. While a visual inspection can reveal some potential transmission problems, it may not uncover all issues. We also offer a fluid analysis, to gain a better understanding of the transmission's condition. 

This inspection aims to identify any visible signs of wear, damage, or potential issues in the cooling system and its related parts. It includes checking for coolant leaks, damaged hoses, and examining the condition of the radiator, thermostat, water pump, and cooling fans. While a visual inspection can reveal some potential cooling system problems, it may not uncover all issues. We also offer a fluid analysis, to gain a better understanding of the cooling system's condition.

This inspection aims to identify any visible signs of wear, damage, or potential issues in the suspension system and related components. It includes checking for signs of damage, wear, or leaks in components like shocks and springs. The inspection may also involve assessing the condition of suspension bushings and mounts. While a visual inspection can reveal some potential suspension problems, it may not uncover all issues.

Scanning for OBD2 diagnostic codes involves using an On-Board Diagnostics (OBD2) scanner or code reader to check for any trouble codes stored in the RV's engine control module (ECM) or powertrain control module (PCM). These diagnostic codes can provide information about issues or malfunctions in the vehicle's engine, transmission, or emissions systems. These codes can help identify problems, and further diagnostic steps may be required to address the specific issues indicated by the codes.